Antenna programmable amplifier Emme Esse 82201N Profiler Domino N
€296.05
Tax included
TP-14411341-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 59€.
Nemokamas Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Antenna programmable amplifier Emme Esse 82201N Profiler Domino N
Antenna Profiler Domino 82201N manufactured by Emme Esse is a programmable terrestrial amplifier with adjustable filters. The amplifier has five inputs: FM + 4x VHF-UHF. You do not need an external programmer to set it up, it is built directly into the amplifier. The amplifier itself detects the highest TV channel connected to the input and accordingly includes an input filter of the upper hold type to reduce interference in the 5G, 4G (LTE) band or the filter is switched off when receiving TV channels above 790 MHz. The amplifier automatically reads and displays the signal level of the selected TV channel, which means that you do not need a meter to adjust. The amplifier allows the frequency conversion of any input TV channel in the VHF and UHF bands to any other TV channel in the VHF and UHF bands, which is advantageous for various hotels and boarding houses where large high frequency distributions have a large attenuation. In the individual TV channels (or filter-clusters), the signal level is automatically regulated in real time (up to 20 seconds) by means of AGC, so that the levels at the amplifier output are constant. The amplifier allows you to process more than 50 TV channels in 32 filters. If you require frequency conversion, there can be up to 3 TV channels in the cluster, for example you can convert a group of channels 21, 22, 23 to a group of channels 31, 32, 33. If you do not require a conversion, there can be up to 6 adjacent channels in one filter. It is possible to include a tilt of up to 15 dB (compared to the reference frequency of 174MHz) at the output of the amplifier to compensate for the attenuation of large-scale television distribution at high frequencies. It is possible to connect preamplifiers to the VHF / UHF amplifier inputs, then it is necessary to turn on the +12 or + 24V preamplifier power supply in the Menu, the total consumption of preamplifiers can be up to 100mA. The amplifier is suitable for comparing TV signals before entering the optoelectric converter for fiber optic distribution. The settings of the entire amplifier module can be locked with a password against unauthorized changes, and it is also possible to save the settings on the SD card and reload these parameters from the SD card when setting another module.
Product parameters:
- simple, intuitive configuration
- 5 inputs: 1 x FM + 4 x VHF / UHF
- 1 main output, 1 test output -30dB
- can process and transmit more than 50 TV channels (multiplexes)
- possibility of remote power supply of external preamplifiers
- built-in internal preamplifiers
- 32 programmable filters with adjustable width for 1 to 6 multiplexes
- frequency conversion of VHF and UHF channel to any other in VHF and UHF bands
- real-time AGC control (up to 20 sec) in individual TV channels or clusters
- the sharpest filters on the market (50 dB on adjacent channels)
- shows the level of individual TV channels - no measuring device is needed
- automatically shiftable filters 5G, LTE on inputs
- Possibility to include a 9dB tilt at the output
- possible replacement of the power supply without dismantling the module
- lock module settings with a password
- possibility to save and later load the configuration to the SD memory card
Technical parameters :
- inputs: 4 VHF / UHF + 1FM
- outputs: 1 main (FM + VHF + UHF) + 1 test -30dB
- frequency range: FM 88 to 108 MHz, VHF 174 to 240 MHz, UHF 470 to 862 MHz
- protection against mobile internet interference: off, LTE, 5G
- FM input level range: 37 to 77dBμV
- VHF input level range: 40 to 109dBμV
- UHF input level range: 40 to 109dBμV
- max. FM signal output level (60dB / IM3): 113dBμV
- max. output level of VHF / UHF signal (60dB / IM3): 115dBμV
- max. output level of VHF / UHF signal (35dB / IM3): 126dBμV
- max. output level of VHF / UHF with 1MUX: 108dBμV
- max. output level of VHF / UHF signal for 6 multiplexes: 105dBμV
- max. FM gain: 35dB
- max. VHF gain: >65dB
- max. UHF gain: up to 65dB
- FM gain control: 20dB
- VHF / UHF gain control: automatic channel AGC
- regulation common at the output: 20dB
- tilt setting (slope adjustement): off, on 0 to 15dB compared to 174MHz
- selectivity: 35dB/1MHz
- MER output quality in the VHF / UHF band: 35dB/35dB
- ESD electrostatic surge protection: yes, all inputs
- voltage setting for preamplifiers: off, + 12V, + 24V (total 100mA for all inputs)
- SD card input: yes, possibility to format, write and load module settings
- working temperature: -5°C to +50°C
- supply voltage: 100 to 240V/AC
- power consumption: 14W
- dimensions: 217 x 165 x 59mm
- weight: 0.8kg
Antenna Profiler Domino 82201N manufactured by Emme Esse is a programmable terrestrial amplifier with adjustable filters. The amplifier has five inputs: FM + 4x VHF-UHF. You do not need an external programmer to set it up, it is built directly into the amplifier. The amplifier itself detects the highest TV channel connected to the input and accordingly includes an input filter of the upper hold type to reduce interference in the 5G, 4G (LTE) band or the filter is switched off when receiving TV channels above 790 MHz. The amplifier automatically reads and displays the signal level of the selected TV channel, which means that you do not need a meter to adjust. The amplifier allows the frequency conversion of any input TV channel in the VHF and UHF bands to any other TV channel in the VHF and UHF bands, which is advantageous for various hotels and boarding houses where large high frequency distributions have a large attenuation. In the individual TV channels (or filter-clusters), the signal level is automatically regulated in real time (up to 20 seconds) by means of AGC, so that the levels at the amplifier output are constant. The amplifier allows you to process more than 50 TV channels in 32 filters. If you require frequency conversion, there can be up to 3 TV channels in the cluster, for example you can convert a group of channels 21, 22, 23 to a group of channels 31, 32, 33. If you do not require a conversion, there can be up to 6 adjacent channels in one filter. It is possible to include a tilt of up to 15 dB (compared to the reference frequency of 174MHz) at the output of the amplifier to compensate for the attenuation of large-scale television distribution at high frequencies. It is possible to connect preamplifiers to the VHF / UHF amplifier inputs, then it is necessary to turn on the +12 or + 24V preamplifier power supply in the Menu, the total consumption of preamplifiers can be up to 100mA. The amplifier is suitable for comparing TV signals before entering the optoelectric converter for fiber optic distribution. The settings of the entire amplifier module can be locked with a password against unauthorized changes, and it is also possible to save the settings on the SD card and reload these parameters from the SD card when setting another module.
Product parameters:
- simple, intuitive configuration
- 5 inputs: 1 x FM + 4 x VHF / UHF
- 1 main output, 1 test output -30dB
- can process and transmit more than 50 TV channels (multiplexes)
- possibility of remote power supply of external preamplifiers
- built-in internal preamplifiers
- 32 programmable filters with adjustable width for 1 to 6 multiplexes
- frequency conversion of VHF and UHF channel to any other in VHF and UHF bands
- real-time AGC control (up to 20 sec) in individual TV channels or clusters
- the sharpest filters on the market (50 dB on adjacent channels)
- shows the level of individual TV channels - no measuring device is needed
- automatically shiftable filters 5G, LTE on inputs
- Possibility to include a 9dB tilt at the output
- possible replacement of the power supply without dismantling the module
- lock module settings with a password
- possibility to save and later load the configuration to the SD memory card
Technical parameters :
- inputs: 4 VHF / UHF + 1FM
- outputs: 1 main (FM + VHF + UHF) + 1 test -30dB
- frequency range: FM 88 to 108 MHz, VHF 174 to 240 MHz, UHF 470 to 862 MHz
- protection against mobile internet interference: off, LTE, 5G
- FM input level range: 37 to 77dBμV
- VHF input level range: 40 to 109dBμV
- UHF input level range: 40 to 109dBμV
- max. FM signal output level (60dB / IM3): 113dBμV
- max. output level of VHF / UHF signal (60dB / IM3): 115dBμV
- max. output level of VHF / UHF signal (35dB / IM3): 126dBμV
- max. output level of VHF / UHF with 1MUX: 108dBμV
- max. output level of VHF / UHF signal for 6 multiplexes: 105dBμV
- max. FM gain: 35dB
- max. VHF gain: >65dB
- max. UHF gain: up to 65dB
- FM gain control: 20dB
- VHF / UHF gain control: automatic channel AGC
- regulation common at the output: 20dB
- tilt setting (slope adjustement): off, on 0 to 15dB compared to 174MHz
- selectivity: 35dB/1MHz
- MER output quality in the VHF / UHF band: 35dB/35dB
- ESD electrostatic surge protection: yes, all inputs
- voltage setting for preamplifiers: off, + 12V, + 24V (total 100mA for all inputs)
- SD card input: yes, possibility to format, write and load module settings
- working temperature: -5°C to +50°C
- supply voltage: 100 to 240V/AC
- power consumption: 14W
- dimensions: 217 x 165 x 59mm
- weight: 0.8kg