Chemical vinyl anchor anchor BL6 - cartridge 300ml /ONLY 1 NOZZLE

Chemical vinyl anchor anchor BL6 - cartridge 300ml /ONLY 1 NOZZLE
Characteristics BL6 chemical vinylester anchors - cartridge 300ml:

It is a two-component styrene-free vinyl ester chemical mortar for high loads.
Mortar does not have expanding force, has great mechanical strength, reacts even in confined spaces. A new mixer is required for reuse.

Use BL6 chemical vinylester anchor - cartridge 300ml:

Anchoring of threaded rods, sleeves, reinforcing rods and similar, mostly metal profiles.
For most solid and hollow (sieve necessary) cohesive building materials - brick, concrete, stone, etc.

Application BL6 vinylester chemical anchors - cartridge 300ml:

Remove any dust residue from the drill hole, unscrew the cap from the cartridge, screw on the application mixer and insert it into the gun.
Do not use the first 10 cm of extruded chemical mortar - perfect mixing can be identified by a uniform gray color.
Fill the hole to half the depth (for hollow materials, first insert the strainer and fill it fully), rotate the anchored element to its final position - depending on the temperature, the joint can be partially manipulated for a limited time.
 Specifications:

Temperature resistance: –30 ° C to + 80 ° C.
Application temperature: –10 ° C to + 35 ° C.