Satellite relay DiSEqC EMP S8 / 1PCN-3, 8x SAT, 1 output
€38.44
Tax included
5 Items
TP-14530837-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 59€.
Nemokamas Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Satellite relay (S8 / 1PCN-3), the switch DiSEqC 1.2 8xSAT IF/SAT IF 1, warranty 72 months
The DiseqC satellite relay switch with the trade name S8/1PCN-3 allows switching of SAT IF signal from up to eight satellites. The output allows the connection of one satellite receiver, which allows switching in the standard DiseqC 1.0, 1.1, 1.2.
The switch has a cover suitable for indoor environments. Satellite inputs are selected with the DiSEqC 1.1 "uncommitted switch" command or the DiSEqC 1.2 "Goto nn" command. The control mode is selected by the built-in DIP switch, for details see the Operating Instructions. The switch is mechanically designed so that it is possible to stack multiple pieces on top of each other, depending on the types of LNBs used - Twin, Quad or Octo. Profi Class product line with a 72-month warranty.
Product parameters :
- satellite switch for signal from 8 satellites to one satellite receiver
- internal design
- switch control signals min. DiSEqC 1.0
Technical parameters :
- frequency range of each sat. input : 950 - 2300 MHz
- output frequency range : 950 - 2300 MHz
- through attenuation : 5 dB max
- isolation between satellite inputs : 25 dB min
- power consumption from each receiver (tuner) : 50 mA (18V) + LNB consumption
- current permeability : 400 mA max
- switch control commands : DiSEqC 1.0, 1.1, 1.2
- dimensions (l, w, h) : 13.6 x 10.4 x 3.3 cm
- temperature range : -30 ~ +70 ° C
- indoor use
The DiseqC satellite relay switch with the trade name S8/1PCN-3 allows switching of SAT IF signal from up to eight satellites. The output allows the connection of one satellite receiver, which allows switching in the standard DiseqC 1.0, 1.1, 1.2.
The switch has a cover suitable for indoor environments. Satellite inputs are selected with the DiSEqC 1.1 "uncommitted switch" command or the DiSEqC 1.2 "Goto nn" command. The control mode is selected by the built-in DIP switch, for details see the Operating Instructions. The switch is mechanically designed so that it is possible to stack multiple pieces on top of each other, depending on the types of LNBs used - Twin, Quad or Octo. Profi Class product line with a 72-month warranty.
Product parameters :
- satellite switch for signal from 8 satellites to one satellite receiver
- internal design
- switch control signals min. DiSEqC 1.0
Technical parameters :
- frequency range of each sat. input : 950 - 2300 MHz
- output frequency range : 950 - 2300 MHz
- through attenuation : 5 dB max
- isolation between satellite inputs : 25 dB min
- power consumption from each receiver (tuner) : 50 mA (18V) + LNB consumption
- current permeability : 400 mA max
- switch control commands : DiSEqC 1.0, 1.1, 1.2
- dimensions (l, w, h) : 13.6 x 10.4 x 3.3 cm
- temperature range : -30 ~ +70 ° C
- indoor use