Power inverter GETI GPIU 1012S 12V/230V 1000W

The GETI GPIU 1012S inverter with charger and UPS (uninterruptible power supply) can be used as a backup power source to ensure the operation of various appliances, especially computers and other data systems during a power failure. The inverter powers the appliances from the mains. As soon as there is a power outage in the network, it immediately starts changing the DC voltage of 12 V from the backup battery to the AC voltage of 230 V∼AC in just 15 milliseconds. When the voltage in the electrical network is restored, the inverter will start feeding the appliances from the electrical network again and will start recharging the backup battery. There is also a 5V USB connector to power mobile devices.


Product parameters:

- voltage converter 12 V DC / 230 V∼AC, with a power of up to 1000 Watts and UPS backup function
- the output current uses a pure sine wave, also suitable for sensitive appliances, audio-video technology, or electric motors
- the start-up time of the backup function of the inverter is approx. 15 milliseconds, the operation of the appliance is ensured without interruption
- only 12 V batteries can be used, preferably with a capacity of 100 Ah or higher
- automatic charging of the backup battery with protection against overcharging
- protection against overload, overvoltage, reverse polarity, overheating, short circuit and complete battery discharge
- The AVR function protects against voltage fluctuations and ensures a delayed start-up of the device after activation of the protection


Technical parameters:

- input voltage: 220 – 240 V∼AC / 50 Hz
- output voltage: 230 V∼AC, sine wave
- USB power connector: 5 V / 2.1 A
- backup battery: 12 V lead, min. 30 Ah
- continuous power: up to 1000 W
- peak power: 2000 W
- backup function startup time: 15 ms
- max. charging current: 10 A
- dimension: 330 x 230 x 100 mm
- weight: 4.2 kg

Additional information:
The inverter switches on the fans automatically when the load exceeds 10 W. In idle mode, the fans do not rotate, i.e. if only connected to the battery. , when connected to the battery, the surge current is 1A, which stabilizes to 250mA after a while.