Parking sensors MNC 54992B
€35.86
Tax included
5 Items
TP-08831547-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 59€.
Nemokamas Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Extremely innovative product that requires no assembly work, discreet, unobtrusive still works great. You do not need to drill a bumper for installation, as with conventional ultrasonic reversing radars. The technology is based on the electromagnetic principle: full space, which is generated by an open vibration circle behind the car, similar to a retractable radio antenna. , it is necessary to attach the tape to the inner side of the bumper and connect it to the internal control unit. The power supply is solved from the bulb of the reversing lamp, so the sensor is activated only during reversing.
- Innovative, electromagnetic principle
- No need to drill a bumper
- There is no blind spot due to belt continuity
- Easy installation
- Compatible with any car
- Cutable to the required length
- Depending on the need, you can install it on the front and side of the vehicle
- Loud signaling of an approaching object (beeps, dense beeps, continuous beeps)
- No need to cable the car
Installation:
If you feel the need for more accessibility, remove the bumper!
Clean and degrease the inside of the bumper
Apply the tape to the bumper without gluing, then cut to the required size. You can also tape the side wall of the bumper to avoid blind spots.
Stick the tape on a flat surface, make sure it is not creased, level it. If your car has a tow hook, the tape must be placed higher so that the hook does not fit into the angle of the belt.
CAUTION: You can remove the tape after gluing it, but it is not possible to reattach it.
Connect the control unit to the tape connector and place it where it cannot be hit by water. Ensure that the device is powered from the reversing lamp. Make sure that the connectors are properly insulated!
Place the speaker in the desired position (under the rear seat, in the luggage compartment), fasten the accessories with double-sided adhesive tape.
Return and ask someone for help during testing.
Technical parameters:
- Power supply: 12 V
- Belt length: 220 cm
- Detection distance: approximately 60 - 70 cm
- Detection technology: Electromagnetic