Voltage converter SINUS Phoenix 500VA 48V VE.Direct

Professional programmable voltage converter 48V/500VA with toroidal transformer, with ECO mode and VE.Direct interface. Warranty 5 years.

Proven reliability of professional Victron Energy inverters with a full 5-year warranty.

The drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.
Inverters are short-circuit proof and protected against overheating, either due to overload or
high ambient temperatures.

This converter is fully configurable - this is a completely unique function, where you can set the following parameters using a PC:
• low and high battery voltage alarm and reset level
• inverter shutdown level at low and high battery voltage and reset level
• Output voltage 220/230/240V
• Frequency 50 Hz or 60 Hz
• ECO mode on / off sensitivity settings (setting the level when the inverter "sleeps" and when it "wakes up" again)

Monitoring is also available:
• input and output voltage and current, temperature, alarms

High starting power
Needed to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode
In ECO mode - when the load input drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 1W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you will save a large amount of energy that the inverter would otherwise have used for its operation.

VE.Direct communication port that can be connected to:

• Computers (VE.Direct to USB cable required)
• Apple and Android smartphones, MacBook tablets and other devices (necessary VE.Direct Bluetooth dongle)

Free software
Current SW versions are available on our software page

Remote on/off, LED diagnostics - see manual.

Cables for connecting to the battery are not included, we will be happy to advise you on the design of a suitable cable cross-section. So don't hesitate to contact us.

Technical parameters:
Continuous output power at 25°C (VA): 500
Continuous active power at 25°C / 40°C (W): 400/350
Peak active power (W): 900
Weight (kg): 3.9
Dimensions h x w x d (mm): 86x172x275

Technical specifications can be found in the downloadable documents below