Phase Sequence and Motor Rotation Indicator UT261A
€76.92
Tax included
TP-07750156-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 59€.
Nemokamas Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Phase Sequence and Motor Rotation Indicator UT261A
The UT261A phase sequence detector is used to check the order of connection of phase conductors to three-phase motors, where the direction of rotation must be observed. After connecting the three supplied test leads to the L1, L2, L3 sockets on the UT261A and the other end with crocodile clips on the motor lead wires, the LCD display shows the direction of rotation of the motor axis clockwise or counterclockwise.
Product parameters :
- three input terminals for phase connection
- category III, 600V, measurement in electricity meter cabinets
- battery-free device, inductive power supply from measured circuit
- measured voltage 90 to 600V / AC, 15 to 400 Hz
Technical parameters :
- measured voltage 90 to 600V / AC, 15 to 400 Hz
- measuring currents in individual phases up to 1mA
- complies with IEC61010 / EN61010, EIC61557-7
- LCD display
- size : 123 x 71 x 29mm
- weight : 160g
- working temperature 0°C - 40°C (32°F - 104°F)
- storage temperature 0°C - 50°C (32°F - 122°F)
- altitude 2000m
- relative humidity ≤95%
- pollution class 2
- IP class IP 40
Package contents :
- UNI-T UT261A
- 3 x category III measuring cables, 600V
- 3 x cable extensions - crocodile clips
- English operating instructions
The UT261A phase sequence detector is used to check the order of connection of phase conductors to three-phase motors, where the direction of rotation must be observed. After connecting the three supplied test leads to the L1, L2, L3 sockets on the UT261A and the other end with crocodile clips on the motor lead wires, the LCD display shows the direction of rotation of the motor axis clockwise or counterclockwise.
Product parameters :
- three input terminals for phase connection
- category III, 600V, measurement in electricity meter cabinets
- battery-free device, inductive power supply from measured circuit
- measured voltage 90 to 600V / AC, 15 to 400 Hz
Technical parameters :
- measured voltage 90 to 600V / AC, 15 to 400 Hz
- measuring currents in individual phases up to 1mA
- complies with IEC61010 / EN61010, EIC61557-7
- LCD display
- size : 123 x 71 x 29mm
- weight : 160g
- working temperature 0°C - 40°C (32°F - 104°F)
- storage temperature 0°C - 50°C (32°F - 122°F)
- altitude 2000m
- relative humidity ≤95%
- pollution class 2
- IP class IP 40
Package contents :
- UNI-T UT261A
- 3 x category III measuring cables, 600V
- 3 x cable extensions - crocodile clips
- English operating instructions
TP-07750156-EU
TP-07750156-EU
Specific References