Water hardness stabilizer LAGUNA Ca 1l
€14.78
Tax included
5 Items
TP-06423343-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 59€.
Nemokamas Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Water hardness stabilizer LAGUNA Ca 1L
The preparation serves to reduce the water hardness, which is generally caused mainly by calcium and magnesium salts. It prevents deposits from forming on the walls and bottom of the pool, and at the same time binds iron and manganese ions to cause undesirable coloration of the water. It is usually expressed in so-called German degrees of hardness, 1 ° N = 10 mg of calcium oxide (CaO) per liter. According to these stages, water is usually distinguished very soft to 4 ° N, soft 4 - 7 ° N, medium hard 7 - 14 ° N, hard 14 - 21 ° N and very hard above 21 ° N. If the pool is impregnated with hard water, calcium and magnesium salts are excreted from the water. Additional debris accumulates on these deposits, creating a suitable environment for the formation of algae, bacteria and viruses. For best results, add the product immediately after filling the pool. Allow the water to circulate for several hours with the filter on to ensure complete mixing. Bathing is possible immediately after application. Other preparations (pH adjustment, chlorine preparations, etc.) should be applied at least 48 hours after adding Ca. In the case of concomitant use with Laguna ALG (anti-algae), a white haze may develop, which is removed by the addition of the ALG Lagoon.
Dosage:
- Initial dose: 250 ml of the product to 10 m3 (10,000 liters) of water (in case of very hard water and increased content of iron and manganese ions we recommend to increase the dose to max. 0.5 liters)
- During the season, when adding fresh water, add 25 ml of product per 1000 liters of water (max. Dose, ie 0.5 l / 10 m3 of water should not be exceeded)
The preparation serves to reduce the water hardness, which is generally caused mainly by calcium and magnesium salts. It prevents deposits from forming on the walls and bottom of the pool, and at the same time binds iron and manganese ions to cause undesirable coloration of the water. It is usually expressed in so-called German degrees of hardness, 1 ° N = 10 mg of calcium oxide (CaO) per liter. According to these stages, water is usually distinguished very soft to 4 ° N, soft 4 - 7 ° N, medium hard 7 - 14 ° N, hard 14 - 21 ° N and very hard above 21 ° N. If the pool is impregnated with hard water, calcium and magnesium salts are excreted from the water. Additional debris accumulates on these deposits, creating a suitable environment for the formation of algae, bacteria and viruses. For best results, add the product immediately after filling the pool. Allow the water to circulate for several hours with the filter on to ensure complete mixing. Bathing is possible immediately after application. Other preparations (pH adjustment, chlorine preparations, etc.) should be applied at least 48 hours after adding Ca. In the case of concomitant use with Laguna ALG (anti-algae), a white haze may develop, which is removed by the addition of the ALG Lagoon.
Dosage:
- Initial dose: 250 ml of the product to 10 m3 (10,000 liters) of water (in case of very hard water and increased content of iron and manganese ions we recommend to increase the dose to max. 0.5 liters)
- During the season, when adding fresh water, add 25 ml of product per 1000 liters of water (max. Dose, ie 0.5 l / 10 m3 of water should not be exceeded)