Antenos stiprintuvas Emme Esse 16dB F-F 81942AG Volo formos su AGC
28,13 €
Su PVM
5 Vnt.
TP-14411302-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 79€.
Prekių Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Antenna preamplifier Emme Esse 16dB F-F 81942AG Roller Shaped with AGC
The new AGC Amplifier Line. This series includes four versions: 83516AG (Art. No. 14411303), 81942AG (Art. No. 14411302), 82462AG, and 81942A5G, which differ in gain, noise and max. Allowed output level and LTE or 5G filter.
Plug-in version code 81942AG has 15 dB AGC gain and is available with 4G and 5G LTE filter. This version has low noise and is suitable as a preamplifier for weak signals. It has the shape of a roller. It is mounted in a coaxial cable or directly on the antenna output. However, you must ensure that the connectors are not stressed mechanically and that moisture does not enter the amplifier. The amplification of the UHF amplifier is controlled automatically by feedback so that it is able to compensate for changes in the input signal due to weather, etc. The maximum signal level at the output is 112dBμV. Max. the gain is 16dB, the noise is 2.1 to 2.5dB.
Technical parameters :
- 81942AG indoor and outdoor amplifier (with additional moisture insulation)
- input 1 F (male) connector, output 1 F (female) connector
- 2.1 to 2.5dB noise
- gain in the UHF max 16 dB band, controlled by AGC
- LTE filter on UHF input
- maximum output level 112dBμV
- power supply 12V / 50mA DC to the amplifier output
The new AGC Amplifier Line. This series includes four versions: 83516AG (Art. No. 14411303), 81942AG (Art. No. 14411302), 82462AG, and 81942A5G, which differ in gain, noise and max. Allowed output level and LTE or 5G filter.
Plug-in version code 81942AG has 15 dB AGC gain and is available with 4G and 5G LTE filter. This version has low noise and is suitable as a preamplifier for weak signals. It has the shape of a roller. It is mounted in a coaxial cable or directly on the antenna output. However, you must ensure that the connectors are not stressed mechanically and that moisture does not enter the amplifier. The amplification of the UHF amplifier is controlled automatically by feedback so that it is able to compensate for changes in the input signal due to weather, etc. The maximum signal level at the output is 112dBμV. Max. the gain is 16dB, the noise is 2.1 to 2.5dB.
Technical parameters :
- 81942AG indoor and outdoor amplifier (with additional moisture insulation)
- input 1 F (male) connector, output 1 F (female) connector
- 2.1 to 2.5dB noise
- gain in the UHF max 16 dB band, controlled by AGC
- LTE filter on UHF input
- maximum output level 112dBμV
- power supply 12V / 50mA DC to the amplifier output