Ašinis sieninis ventiliatorius su žaliuzėmis AV PRO 100 su laiko atidėjimu
54,50 €
Su PVM
TP-06425787-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 79€.
Prekių Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Axial wall fan with louvre AV PRO 100 with time delay
Axial wall fan with louvre AV PRO 100 T with time delay:
Wall axial fan is designed especially for ventilation of rooms with higher humidity. It is equipped with a gravity louvre to prevent backflow of air and at the same time does not hinder the natural air flow through the fan, similar to the gravity ventilation grille. This also improves the ventilation of the room. It is particularly suitable for the removal of bathrooms, kitchens and other premises, wherever there is a risk of backward draft, penetration of unpleasant odors from other households of the house connected to common ventilation shafts.
Variant: T - with time delay in the range of 2 - 23 min. Adjustment is done by means of a trimmer on the control board under the cover grille.
Turbine:
It is characterized by high air and low acoustic pressure. A separate turbine type was designed for each fan size. Its size and shape are the result of parametric simulations. The turbine is mounted on the front of the fan and is so well attached that it is almost impossible to remove. Perfect turbine balancing extends engine life.
Material:
Fan housing and cover grille - high quality, white ABS
Active parts - polycarbonate
Cable glands - silicone
Technical parameters:
Flow rate: 97 m3 / h
Static pressure: 30 Pa
Sound pressure: 39 dB
Voltage: 230 V, 50 Hz
Power: 15 W
Speed: 2400 rpm
Operating temperature: -20 ° C to 40 ° C
Bearings: plain
Thermal protection: up to 125 ° C
Manufacturer part number: AV PRO 100 T.
Package content: Set of dowel screws.
Dimensions: A: 160.5mm, B: 117mm, C: 100mm, D: 85mm.
Axial wall fan with louvre AV PRO 100 T with time delay:
Wall axial fan is designed especially for ventilation of rooms with higher humidity. It is equipped with a gravity louvre to prevent backflow of air and at the same time does not hinder the natural air flow through the fan, similar to the gravity ventilation grille. This also improves the ventilation of the room. It is particularly suitable for the removal of bathrooms, kitchens and other premises, wherever there is a risk of backward draft, penetration of unpleasant odors from other households of the house connected to common ventilation shafts.
Variant: T - with time delay in the range of 2 - 23 min. Adjustment is done by means of a trimmer on the control board under the cover grille.
Turbine:
It is characterized by high air and low acoustic pressure. A separate turbine type was designed for each fan size. Its size and shape are the result of parametric simulations. The turbine is mounted on the front of the fan and is so well attached that it is almost impossible to remove. Perfect turbine balancing extends engine life.
Material:
Fan housing and cover grille - high quality, white ABS
Active parts - polycarbonate
Cable glands - silicone
Technical parameters:
Flow rate: 97 m3 / h
Static pressure: 30 Pa
Sound pressure: 39 dB
Voltage: 230 V, 50 Hz
Power: 15 W
Speed: 2400 rpm
Operating temperature: -20 ° C to 40 ° C
Bearings: plain
Thermal protection: up to 125 ° C
Manufacturer part number: AV PRO 100 T.
Package content: Set of dowel screws.
Dimensions: A: 160.5mm, B: 117mm, C: 100mm, D: 85mm.