Išmanusis akumuliatoriaus įkroviklis BlueSmart 24V/16A, 3

Išmanusis akumuliatoriaus įkroviklis BlueSmart 24V/16A, 3 išėjimai, IP22

312,84 €
Su PVM
TP-04240558-EU
Kiekis
Išparduota

  Saugus Atsiskaitymas

El. Bankininkystė, Grynais arba Visa - Mastercard

  Nemokamas Pristatymas

Nemokamas pristatymas užsakymams nuo 79€.

  Prekių Grąžinimas

Suteikiame 14 dienų pinigų grąžinio garantiją


Charger with unrivaled efficiency and low power consumption, with built-in Bluetooth technology. Sophisticated microprocessor-controlled battery charger. Three outputs, active cooling.

An extended 5-year warranty applies to all BlueSmart charger models.

Integrated bluetooth
You can set up, view and configure the Blue Smart IP22 charger via your smartphone. You can view the status of the charger and battery. Even control charger functions with VictronConnect. The default voltage and current value is displayed on the screen. You can download the application for iOS and Android here. You can also download the VictronConnect app for free on Google Play or in the App Store.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat, compared to industry standard. And once the battery is fully charged, power consumption is reduced to 0.5 W, about five to ten times less than industry standard.

Adaptive 6-stage charging algorithm: test - bulk - absorption - reconditioning - float - storage
The charger is equipped with a microprocessor controlled by "adaptive" Battery Management. The adaptive function automatically optimizes the charging process

Storage mode: less maintenance and aging when the battery is not in use
Storage mode - if the battery has not been discharged for 24 hours. In storage mode, the voltage is reduced to 2.2 V / cell (13.2 V per 12 V battery) to minimize gassing and corrosion of the positive plate. Once a week, the voltage increases to the absorption level to "balance" the battery. This feature prevents electrolyte stratification and sulfation.

Also charging Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged in a bulk-absorption-float algorithm.

NIGHT and LOW settings
When night or LOW mode is set, the output current is reduced to a maximum of 25% of the rated power and the charger will be completely noiseless. NIGHT mode ends automatically after 8 hours. LOW mode can be terminated manually.

Overheat protection
The output current will decrease if the temperature rises above 50°C, but the charger will not be damaged.

See a detailed online manual describing all Smart features here.

Technical data:

Input voltage: 180 - 265 V AC
Frequency: 45 - 65 Hz
Charging current: 15 A
Charging current in night and LOW mode: 3.75 A
No-load power consumption: 0.5 W
Number of outputs (rechargeable batteries): 3
Charging character: adaptive four-stage
Absorption charging voltage: 28.8 V
Trickle charge voltage: 27.6 V
Storage mode voltage: 26.4 V
Protections: output polarity reversal, output short circuit, overheating
Operating temperature range: from - 20 to + 50°C
Humidity: maximum 98%
Housing material: aluminum
Color: blue (RAL 5012)
Battery output: terminal block without cables
230 V AC charger input: 1.5 m cable with standard plug
Degree of protection: IP 22
Plug Type: CEE7 / 7 (Schuko)
Weight: 1.3 kg
Dimensions (height x width x length): 65 x 108 x 235 mm
VICTRON ENERGY
TP-04240558-EU
TP-04240558-EU

Specifiniai Kodai

Naujos Paskyros Kūrimas

Jau turite paskyrą?
Prisijungti Arba Priminti slaptažodį