Signalizacija iGET M5 4G/LTE Premium

Take control of your home with the iGET SECURITY M5-4G Premium intelligent security system. It is wireless, it communicates with your phone via 4G LTE, WiFi and Ethernet. In the event of an Internet outage, it switches to 4G LTE and can also send SMS messages via GSM. It understands both Android and iOS, you can monitor indoor and outdoor IP cameras with it, control 230V sockets and more than 20 other types of accessories. The battery life of the accessories is up to 5 years and the range to the alarm is up to 1 km. The alarm also offers connection to the central security desk, care mode, doorbell function or special smart functions and buttons. The highest security of communication is 256 bit and you can adjust the alarm settings remotely from anywhere. The manual and applications are completely in Czech, Slovak, Polish, Hungarian and English.

iGET SECURITY M5-4G Premium
is an ideal intelligent system for securing all buildings - houses, apartments, cottages, offices, garages, shops, warehouses, offices, etc. It is a wireless alarm with simple installation and control, which will not only secure your house. You can use it to remotely or according to a timer to start electrical appliances using controlled sockets, and also to monitor events at any time using IP cameras. In the event of an alarm, the alarm starts recording on this IP camera and shares the video with the application on your mobile phone. All sensors are wireless, most are powered by batteries with a life of up to 5 years, the main unit is powered by 230 V (but also has its own backup battery with a life of at least 8 hours). Thanks to this, the building is constantly guarded by a backup battery, even in the event of a power failure. It also has a backup of Internet connection, in case of connection failure via WiFi or Ethernet cable it automatically switches to 4G LTE data network, or vice versa. It can also send SMS messages about alarm and alarm status.

Application
The application is freely available on Google Play and iOS market for control. The application is completely free at all times. With the help of this application it is possible to make clearly complete settings, add sensors, control IP cameras, controlled sockets, etc. The application is in Czech, Slovak, Polish, Hungarian, English and many others. One application thus combines the setting and control of alarms, IP cameras, smart buttons and controlled sockets, all-in-one. The application also supports a special alert for the iOS platform - Critical alerts.

Wireless transmission and security
The sensors are connected to the main unit via wireless transmission with a range of up to 1 km. This wireless transmission takes place on the frequency of 868.35 MHz and excels in the strongest security in the world, MD5 + SHA256. This special 256-bit algorithm has not yet been broken in the world. Despite this special security and the huge range of the sensors to the main unit, the sensors have a battery life of up to 5 years. Furthermore, the alarm communicates to the Internet via special secure European Google servers with GDPR support, which creates a connection between the alarm and the mobile phone. In addition, the M5-4G supports Bluetooth connectivity, which greatly simplifies the initial setup of the main unit.

How the alarm communicates with the application / phone
The iGET SECURITY M5-4G alarm is connected to the Internet and automatically communicates with the server. Connection of M5-4G to the Internet is necessary and it is possible to realize it using WiFi connection (alarm contains WiFi 802.11 b / g / n 150 Mb / s), using Ethernet cable with RJ45 connector (speed 10/100 Mb / s), and also using 4G LTE mobile data transmission. The user's mobile phone must be connected to the Internet via a data connection or WiFi in order for the alarm to be able to communicate with the mobile phone. The alarm also supports sending SMS messages via a basic GSM connection. Wireless IP cameras are directly connected to your home WiFi network with Internet connection as well as the M5-4G alarm.

Connection to the PCO central protection desk
The iGET SECURITY M5-4G alarm also supports connection to the central protection desk - PCO. This makes it possible to connect the alarm to security agencies that guard your property. Specifically, it supports PCO type CMS Contact ID, SIA-09.

Many user accounts
The iGET SECURITY M5-4G alarm contains 3 levels of user accounts. The highest is the "Administrator", who performs all settings and controls. Then there is the "User" - he can control the alarm, but does not make settings (activate / deactivate / home mode / SOS, viewing online video from cameras, socket control, etc.). The lowest level is "Host", which can only control the following modes: activate / deactivate / home mode / SOS.

Quickly share settings and create an account
If the administrator wants to add more users, it's very easy. Just install the "iGET M5" application on another mobile phone. Then display the QR code for sharing on the first phone and scan in the app using the second phone. This completes the pairing.

Large portfolio of additional accessories and controls
All accessories compatible with the iGET SECURITY M5-4G alarm are marked iGET SECURITY EPxx (xx indicates the numbers 01 to 99). It is not necessary to pull wires even with to connect the sensors to the central unit load setting. The sensors are wireless and most are powered by batteries, adding them to the system is a matter of minutes. The sensors have a range of up to 1 km to the main unit. All you have to do is insert the batteries, scan the code on the sensor with your phone and place it in the room. An unlimited number of additional accessories can be added to the alarm.
Activating and deactivating an alarm is also easy and fast, either using a wireless key fob, wireless keyboard, RFID chip or mobile application. Durable key fobs also serve as alarm remote controls. They can be used to activate / deactivate the alarm, activate the SOS alarm or set the Home mode to certain zones only.

"Watch" mode
It is a special function for caring for, for example, elderly parents or other members of the household. The user chooses which sensors and at what time to monitor the activity of the caretaker in the given object, and if the activity does not manifest itself at the selected time, the alarm notifies the user by notification.

"Doorbell" function for houses and shops
For use in stores, the user can choose which sensor to respond. E.g. the door sensor works in such a way that when the contact is opened, the alarm starts playing the selected melody (the alarm must be in Home or Deactivated mode), in Active mode this sensor triggers an alarm. For home it is possible to use the smart button EP7 for the classic ringing, the alarm can be in all modes.

Control of controlled sockets 230V
The iGET SECURITY M5-4G alarm includes not only security but also intelligent home management. With the help of remotely controlled sockets iGET EP16 for controlling one 230V appliance, it is possible to control, for example, lighting, heating or air conditioning. The socket is connected to a standard mains socket and the selected appliance. You can turn it on / off remotely, set a timer or follow a function. In addition, the smart socket can measure energy consumption.

IP cameras
It is possible to add iGET SECURITY EP15 (indoor rotating with sound), EP18 (outdoor fixed with sound) and EP20 (indoor fixed with sound) wireless FullHD IP cameras to the iGET SECURITY M5-4G alarm. It is always possible to connect to these cameras via online data transmission. The cameras are connected via WiFi to a wireless network.

"Ready to Arm" function
When switching to Active mode, the main unit checks if all windows and doors are closed, if not, notifies you which windows / doors remain open. The user can either close them or confirm in the application that they should remain open and the alarm will switch to Active mode. The function can also be set only for some sensors or for none.

Possibility of naming sensors and controllers
iGET SECURITY M5-4G offers full naming of sensors, controllers and all accessories. You can enter up to 160 characters with accents. This is definitely more convenient and clearer than having to choose from a preset menu of room names.

Tamper protection, power disconnection
As soon as the alarm detects a signal that tries to interfere with the band on which the wireless sensors communicate, it immediately triggers an alarm. When the main power supply to the 230 V alarm is disconnected or connected, it immediately informs the user via the application. The backup battery in the alarm has a duration of min. 8 hours.

Low battery in the sensor
The user can check at any time in the application what percentage of the sensor battery remains and replace it in advance. The application also automatically reminds you of the low battery level in the sensor so that it can be recharged / replaced in time.

Programmable Smart Buttons
The alarm also supports special smart buttons to which a function can be assigned. The smart button EP7 and the fifth button on the keychain EP5 can be used, for example, to control a socket and a light bulb, such as a doorbell, etc.

Automatic firmware update in the main unit
The main unit automatically checks the availability of the latest firmware on the server, gradually caches it, and then updates this firmware during peak hours. The update is very fast, it takes about 1 minute. The update adds new features, adjusts security rules to a higher version, and supports additional sensors.

Properties:

- Intelligent wireless security system with Internet connection via 4G LTE / WiFi / Ethernet.
- Controls indoor and outdoor IP cameras, switches controlled 230V sockets, and communicates with more than 20 types of wireless accessories, marked as iGET SECURITY EPxx.
- Supports connection of an unlimited number of other wireless accessories.
- The application for overall control and system settings is available for Android and iOS and is available in Czech, Slovak, Polish, English and Hungarian.
- "Ready to Arm" function - when the alarm is activated, the main unit checks whether all windows and doors are closed, if not, writes in the notification that they remain open.
- "Doorbell" function - the user selects which sensor should respond, eg door sensor, when the contact is opened the alarm starts playing the selected melody, the alarm must be in Home or Deactivated mode, in Active mode this sensor triggers an alarm, it is also possible to use smart button EP7 for this ring.
- "Babysitting" mode - special functions for caring for eg elderly parents, the user selects which sensors and at what time should monitor the activity of people in the object, if there is no activity at the selected time, alarm alerts via notification, switches in mode Home and Disabled.
- Programmable buttons - the EP5 key fob contains a fifth button to which a function can be assigned, also for the EP7 smart button, eg control of a socket and a light bulb, such as a doorbell, etc.
- Time and following functions - it is possible to set many logical Smart functions, eg when activating the alarm, turn off all EP16 sockets, or activate the Home mode every day at 22:00, etc.
- Secret intrusion alarm: the user enters a code to turn off the alarm, but this unique code is different from the classic one and activates a silent alarm in the alarm and informs other users about it.
- Supports connection to PCO - central protection desk. This surveillance system is used by agencies to protect your property. It accurately supports PCO type CMS Contact ID, SIA-09.
- Tamper protection - as soon as the alarm detects a signal that seeks to interfere with the band on which the wireless sensors communicate, it immediately triggers an alarm.
- Many options for setting alarm zones, each sensor can be named by its own name.
- Alarm activation and deactivation takes place using key fobs / keyboard / RFID keys / application.
- The main unit automatically downloads and installs the latest firmware updates from the server.
- Informs about status / alarm via application notifications or SMS.
- Includes an integrated 100 dB internal siren.
- It contains a backup battery, thanks to which the alarm is still fully active even when the main power supply is disconnected (lasting at least 8 hours), it informs the user about this main power failure via the application / SMS.
- Includes a shock detector to detect damage to the alarm or accessories.
- The alarm shows the status of each accessory as a percentage in the application. Informs the user through the application in which the battery accessory runs out of battery. Battery life up to 5 years.
- Range of wireless sensors up to 1000 m, for selected up to 200 m. The sensors are easy to mount in the desired location. The alarm shows the signal range of the accessory.
- With the help of purchased IP cameras, you can freely monitor what is happening in the household and the phone will provide you with current events via online video immediately in the event of an alarm.
- SIM card size: Micro SIM card.

Package contents:

- 1x M5 - central security unit, provides control of all wireless sensors and all system control. It communicates via GSM 4G LTE / WiFi / Ethernet.
- 1x EP13 - wireless keyboard with RFID reader, controls the alarm status by entering a code or attaching an RFID key.
- 1x EP1 - wireless motion PIR sensor for securing the room.
- 1x EP4 - wireless magnetic sensor for securing doors and windows.
- 1x EP5 - remote control (keychain), for quick alarm control, contains an adjustable Smart button.
- 1x EP22 - RFID key for attachment to the EP13 wireless keyboard, for quick activation and deactivation of the alarm.
- 2x Warning labels informing about the presence of a security device.
- 2x power adapter for M5 alarm and EP13 keypad.
- 1x UIG - user manual in Czech, Slovak, Polish, English and Hungarian
- 1x Ethernet cable RJ45.

Optional accessories:

- iGET SECURITY EP1 - Wireless PIR motion sensor
- iGET SECURITY EP4 - Wireless magnetic sensor for doors, windows
- iGET SECURITY EP5 - Remote control (keychain)
- iGET SECURITY EP7 - Wireless Smart button
- iGET SECURITY EP9 - Wireless water sensor
- iGET SECURITY EP10 - Wireless vibration sensor
- iGET SECURITY EP11 - Wireless outdoor siren
- iGET SECURITY EP13 - Wireless keyboard with RFID reader
- iGET SECURITY EP14 - Wireless smoke sensor
- iGET SECURITY EP15 - Wireless rotating indoor Full HD IP camera with sound
- iGET SECURITY EP16 - Wireless controlled smart socket 230V
- iGET SECURITY EP17 - Wireless PIR motion sensor without detection of animals up to 20kg
- iGET SECURITY EP18 - Wireless outdoor Full HD IP camera with sound
- iGET SECURITY EP20 - Wireless indoor Full HD IP camera with sound
- iGET SECURITY EP21 - Wireless magnetic sensor for iron doors, windows, gates
- iGET SECURITY EP22 - RFID key
- iGET SECURITY EP24 - Wireless indoor siren