Durų / langų detektorius iGET EP4
19,31 €
Su PVM
5 Vnt.
TP-08831504-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 79€.
Prekių Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
iGET SECURITY EP4 - Wireless magnetic sensor for doors / windows
Wireless magnetic sensor designed to detect the opening of doors and windows, for the iGET SECURITY M5 alarm. He will warn you if you forget to close the window / door when leaving. Tamper protection, maximum 256bit transmission security, very long battery life of 5 years, alarm constantly monitors the activity of this sensor, as well as the signal, battery percentage and more.
A sensor that mounts to door and window frames. The second part of the sensor is then directly on the doors and windows. When these two parts are separated by 1 cm, detection occurs. The sensor also monitors the condition of the doors / windows, thus notifying which windows and doors remain open when the alarm is activated. Processing in a modern design, low energy consumption. Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 1 km. Indoor use.
- sensor, where it is necessary to guard by opening the magnetic contact, ie. reacts when doors, windows, etc. are opened,
- detection based on the separation of two magnetically interconnected parts, one part is located on the door / window frame and the other part on the door / window, as soon as they are more than 1 cm apart, the contact opens and an alarm signal is sent,
- this detector also knows what condition the window / door is in - ie. whether the window / door is open or closed right now. When the alarm is activated when leaving the building, the alarm notifies you via the application notification or via SMS which window / door has remained open and it is possible to choose whether or not it should remain so.
- Example of notification of an application or SMS when a forgotten open door window: "The following sensors are still disconnected, really change the alarm status? Children's room window, Garden door."
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- contains a signaling LED diode - lights up when an opening is detected, stays on when the battery is low, also serves as a test button,
- the highest encryption of 256-bit wireless transmission,
- battery life up to 5 years depending on the number of openings,
- distance of the sensor from the main unit up to 1 km,
- the iGET M5 alarm still checks if this sensor is available, also the signal strength and the% of the battery in the sensor,
- setting options: immediate alarm, delay, Home mode, Welcome Gong,
- thick double-sided tape included in the package for easy attachment,
- concealed mounting holes in the sensor and magnet for mounting with screws.
Properties:
- Transmission frequency: 868.35 MHz
- Operating temperature: - 10 ° C ~ + 50 ° C
- Operating humidity: up to 90% (no condensation)
- Battery life: up to 5 years
- Power supply: 1x 3V battery, type CR123A
- Operating current: up to 100 mA
- Quiescent current: 0.015 mA
- Contact opening: at a distance of 1 cm or more
- Signal range to the central unit: up to 1 km in direct line of sight
- Sensor weight: 39g including battery
- Sensor dimensions (length x width x depth): 84 x 26 x 22.5 mm
- Magnet dimensions (length x width x depth): 34 x 11 x 9.5 mm