Suvirintojo šalmas PROTECO 10.55-P800E-F
40,51 €
Su PVM
5 Vnt.
TP-06691504-EU
Saugus Atsiskaitymas
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas Pristatymas
Nemokamas pristatymas užsakymams nuo 79€.
Prekių Grąžinimas
Suteikiame 14 dienų pinigų grąžinio garantiją
Welding helmet PROTECO 10.55-P800E-F
The P800E-F self-dimming welding helmet with a FLAME motif is primarily intended for welding, but can also be used for grinding. It is made to protect your eyes and face from UV / IR radiation, metal spatter during normal arc welding and small particles flying off during grinding. The model is equipped with a specially developed fully adjustable head cross. When lifting the hood, the center of gravity shifts to the center of the head. This reduces the load on the neck and head. The filter is powered by a solar cell and long-lasting replacement lithium batteries. After the arc is ignited, the filter is immediately darkened, thanks to 4 high-performance sensors. The reaction time of the filter is 1/30000 s (0.033 ms). When the arc goes out, the filter automatically brightens. The brightening delay is adjustable in the range of 0.1 - 1 s.
TECHNICAL PARAMETERS
Filter window size 98 x 43 millimeters
Weight 0.52 kg
Material EN 175 polyamide
Storage temperature - 20 to 70 degrees Celsius
Working temperature - 5 to 55 degrees Celsius
Battery and filter capacity test yes
Solar cell filter power supply + CR2450 replaceable lithium battery
For MMA, MIG / MAG, TIG> 5A, SAW, SMAW, PAC, PAW methods
Welding / grinding mode selection
Adjust the sensitivity continuously
3-stage filter brightening time (0.1, 0.5, 1.0s)
Filter dimming DIN 9 - 13
Basic dimming DIN 4
UV / IR protection DIN 16 at all times
Hood type
Switching type fully automatic
Optical sensors 4
Optical class EN 379 1/1/1/1
The P800E-F self-dimming welding helmet with a FLAME motif is primarily intended for welding, but can also be used for grinding. It is made to protect your eyes and face from UV / IR radiation, metal spatter during normal arc welding and small particles flying off during grinding. The model is equipped with a specially developed fully adjustable head cross. When lifting the hood, the center of gravity shifts to the center of the head. This reduces the load on the neck and head. The filter is powered by a solar cell and long-lasting replacement lithium batteries. After the arc is ignited, the filter is immediately darkened, thanks to 4 high-performance sensors. The reaction time of the filter is 1/30000 s (0.033 ms). When the arc goes out, the filter automatically brightens. The brightening delay is adjustable in the range of 0.1 - 1 s.
TECHNICAL PARAMETERS
Filter window size 98 x 43 millimeters
Weight 0.52 kg
Material EN 175 polyamide
Storage temperature - 20 to 70 degrees Celsius
Working temperature - 5 to 55 degrees Celsius
Battery and filter capacity test yes
Solar cell filter power supply + CR2450 replaceable lithium battery
For MMA, MIG / MAG, TIG> 5A, SAW, SMAW, PAC, PAW methods
Welding / grinding mode selection
Adjust the sensitivity continuously
3-stage filter brightening time (0.1, 0.5, 1.0s)
Filter dimming DIN 9 - 13
Basic dimming DIN 4
UV / IR protection DIN 16 at all times
Hood type
Switching type fully automatic
Optical sensors 4
Optical class EN 379 1/1/1/1