PU putų valiklis PENOSIL Premium 460ml

Cleaning spray for removing uncured construction foam from tools and surfaces.

Use
It is used to remove uncured construction foam from clothing and tools and to immediately clean the inside and outside of the foam gun after use.
Cleaning of window frames, window sills, doors, door frames, etc. from uncured building foam during work.
Application temperature from -10 ° C to +30 ° C.

Application procedure
Use the spray nozzle on the container to remove foam from clothing and surfaces. To clean the foam gun from the inside, connect the detergent container to the gun by holding the gun handle with one hand and
with the other hand you turn the upright container. Make sure that the weapon is not aimed at people when turning. Only after connection turn the container together with the gun to the working position, ie upside down. Shake the canister and clean the gun by pressing the trigger until foam appears in the emerging detergent. Handle the cleaner with special care as it contains flammable gas.
Not suitable for removing cured foam.

Cleaning:
Cover with an inert absorbent (eg sand). Collect and place in a suitable container or allow to evaporate.

Security requirements:
The cleaner is flammable and flammable. Use only in well-ventilated rooms, avoid smoking and
static electricity. Vapors may cause dizziness or vertigo. Avoid contact with skin and eyes.
Keep out of reach of children.
Detailed safety information is available in the safety data sheet (SDS)