Charger Li-Ion Article 1A protection, module with IO TP4056 (micro USB)
El. Bankininkystė, Grynais arba Visa - Mastercard
Nemokamas pristatymas užsakymams nuo 59€.
Suteikiame 14 dienų pinigų grąžinio garantiją
The charger is designed for charging 1-2 lithium cells with a voltage of 3.6V with a constant current of 1A up to a voltage of 4.2V, which it then maintains on the poles of the cell.
Product parameters:
- constant current charging. By changing the resistance Rprog-viz. Datasheet current can be changed in the range of 130mA-1A
- end of charging after reaching the terminal voltage of the cell 4.2V
- reconditioning charging with 130mA current if the cell terminal voltage level is <2.9v. when="" this="" voltage="" is="" reached="" the="" module="" charges="" with="" a="" rated="" current="" of="" up="" to="" 1a="" br="">- optical check of charge status. The red LED indicates charging, the blue LED indicates charging is complete
- protection against excessive discharge. When discharging, it disconnects the cell from the appliance at a terminal voltage <2.4v and="" reconnects="" it="" when="" ubat=""> 3V is reached. Charging of such a discharged cell is possible
- overcurrent and short-circuit protection at discharge current> 3A
Technical parameters:
- IC TP0456 + DW01A, MOSFET FS8205A
- charging method: CC / CV
- input voltage: 4.5–6V
- input connector: micro USB
- charging current 1A (by changing the resistance it is possible to set 130mA-1A)
- end of charging: 4.2V
- reconditioning charging at <2.9V
- protection against excessive discharge, excessive current and short circuit
- dimensions 17 × 28mm / 1.6g
The product is not a stand-alone unit, it requires professional installation.