Digital thermostat XH-W1219, -50 to 110 ° C

Digital thermostat XH-W1219, -50 to 110 ° C. Model: XH-W1219.


Technical parameters:

- model: XH-W1219
- power supply: DC12V
- relay current: 50mA
- control range: -50 ~ 110 degrees Celsius
- control accuracy: 0.1 celsius
- measuring input: NTC10K waterproof sensor L = 0.5 m
- high temperature alarm: -49 ~ 110 celsius
- DC 12V output type: relay output 10A (max.)
- return flow difference setting: 0.1 ~ 30 degrees Celsius Start-up delay: 0-10 minutes
- temperature calibration: -10 ~ 10 degrees Celsius
- size: 60 x 43 x 16 mm

- P0: Temperature control mode (cooling / heating): when using this product for the first time, if used for heating, set H, if used for cooling, set C.
- P1: Return difference setting (0.1 ~ 30 celsius): long press the SET key to enter the internal setting, select the P1 setting; then press the SET button to set the return difference value
- P2: Temperature calibration: this function is used to calibrate the temperature. If the detection temperature and the actual temperature differ, users can use this function to calibrate
- P3: Start delay (0 ~ 10 minutes): this function is for compressor cooling
- P4: Set high temperature alarm value (-50 ~ 110 Celsius): if the actual temperature is higher than this value, the screen will start flashing and an alarm will sound
- restore factory settings: With the power on, press and hold the + - button for 3 seconds

The product is not a self-functional unit, it requires professional assembly.